Netac-tech T600 Manual de usuario descargar pdf (Pagina 40)

Netac AirTrack T600 Mini Wireless Router

8 LAN Page

The AP Router Mode's LAN page, shown in Figure 8.1, allows the user to set the IP address of T600.

Figure 8.1 AP Router Mode - LAN Page

Table 8.1 AP Router Mode - LAN Page Options

Field Description

IP Address

Set the IP address of T600.

NOTE: To configure T600, the user must access T600 from a PC that is on the

same subnet.

Subnet Mask Allow the user to specify a subnet mask. Default: 255.255.255.0.

DHCP Service Disable/Enable DHCP server.

DHCP Start IP Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100.

DHCP End IP Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150.

DHCP IP Release Set the effective time of the IP address assigned by DHCP server.

Figure 8.2 shows the LAN page for Repeater Mode.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

Sin comentarios

Netac-tech T600 Manual de usuario Pagina 40